Barco Solaris LC40 R9004120, Owner'S Manual

Page: 33 / 83

5. Getting used with the Menu Structure
5. GETTING USED WITH THE MENU STRUCTURE
Overview
• How to start up the menus
• Using the menus
• Adjusting a control in a Slider box
5.1 How to start up the menus
Box menu structure
The Solaris LC40 has a box based menu structure with a parent - child relationship. When selecting an item in parent menu box
(higher level) it opens a child menu box (lower level) in which you can make other selections or it activates an adjustment.
How to start up
1. Press ENTER or ADJUST on the RCU
Or,
press on the thumb wheel on the back side of the panel. (menu 5-1)
Main Menu
Input selection
Image settings
Audio settings
Compact PC Control
Advanced settings
Installation
Service
Standby
Back
Menu 5-1
5.2 Using the menus
Layout
Non selectable items are grayed out in the menuboxes. These grayed out items are not selectable. When scrolling through the
menu box content, the cursor jumps over the grayed out items.
Selecting an item
1. Use the up or down arrow keys on the RCU to select the desired item and press ENTER to select
Tip: When on the first item, push once on the up arrow key to select the last item in the list, or when on the last item (Back),
push the down arrow key once again to select the first item.
Or,
turn the thumb wheel until the desired item is selected and press the thumb wheel.
Tip: When on the first item, turn the wheel left to arrive on the last item, or when on the last item (Back), turn the wheel a little
further to arrive on the first item.
Go one level up
1. Press EXIT
Or,
select Back and press
ENTER or press the thumb wheel.
Escape from the menus
1. Press ADJUST on the RCU.
The explanation of the menu structure in the next chapters will be done using the RCU. Of course, everything
is possible with the thumb wheel.
R5976672 SOLARIS LC40 01122003 29