Barco SIM 7QP HB, User Manual

Page: 73 / 206

7. Advanced
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired layer (for example Layer 1)
7. Use ↑ or ↓ to select the desired input (for example Data on BNC)
Image 7-38
Note: Inputs that are not hardware compatible with this layer are greyed out.
Note: if a fi le is already forced for that input it will be shown on the right.
8. Press ENTER
The Load dialog box is displayed
9. Use ↑ or ↓ to select the desired fi le (for example /Standard/SXGA+@60.xml )
10.Press ENTER
The fi le is selected and will be loaded in the future.
To delete the forced fi le, go to the desired input and press ENTER.
7.5 Geometry
Overview
• Introduction
• Geometry fi les
• Accessing the Geometry menu
• Geometry distortions
• Load
• Edit
• Rename a Geometry File
• Copy a Geometry File
• Delete a Geometry File
7.5.1 Introduction
What can be done ?
With the geometry corrections, this projector can be used in a wide variety of curved and fl at-screen applications, ranging from fl at
or straightforward cylindrical displays to the wildest shapes that can be imagined: by pre-distorting the image inside the projector, a
correct geometry can be achieved on curved screens, without requiring additional computational power on the IG’s side.
R59770330 SIM 7QP SERIES 08/12/2014 69