![background image](http://html1.mh-extra.com/html/barco/sim-7qp-hb/sim-7qp-hb_user-manual_4252429117.webp)
7. Advanced
1.
Internal soft edges : the contour and shape can be adjusted in the projector using the soft edge edit wizard
2.
External Alpha planes : An external
fi
le is sent to the projector and is memorized. This
fi
le contains data corresponding to the
shape contour of the soft edge
Soft Edge Preparations
To ensure proper soft edge adjustment, be sure that the following adjustments are done perfectly on all projectors:
•
Geometry
•
Color Matching (Input Balance, Dynacolor ...)
When projecting on a cylindrical screen, the adjustments mentioned above can be done by using the projector
adjustments in combination with Polaris.
Polaris is a Test Pattern Generator software that can generate a user-de
fi
ned test pattern that is used to align
projection systems. It also has the ability to generate prede
fi
ned patterns for standardized projection sys-
tems. The software is developed to run on IRIX (Order numbers for Polaris: R9898300 for a 6 months license,
R9893301 for a full license).
Note that the soft edges are placed on the distorted image i.e. it surrounds the limits of the distorted image.
7.8.5.2
Accessing the Soft edge menu
How to access the Soft edge menu ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
Display setup
3. Press
↓
to pull down the menu
4. Push
↓
or
↑
to select
Soft edge
5. Push the
→
key to pull down the menu.
Image 7-119
7.8.5.3
Soft edge edit
Overview
•
•
•
•
R59770330 SIM 7QP SERIES 08/12/2014
113
Summary of Contents for SIM 7QP HB
