![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408184.webp)
7. Advanced
Image 7-240
Press the double right arrow key until the dimmer appears on the bottom edge of the screen
7. Use the
fi
ne adjustment buttons to move the dimmer back until it is just no longer visible on the full white pattern.
Image 7-241
Use the
fi
ne adjustment buttons to move the dimmer back until it is no longer visible
This is the correct reference position for Dimmer 2.
8. Press
BACK
to return to the
Lamp
menu.
The new Dimmer Reference Points are saved.
7.11.4.2 Calibration of ECR
C
AUTION
:
Changing the ECR settings may seriously affect the performance of projector. Only authorized
Barco technicians can use this feature. If the values are incorrect, the light output may drop.
C
AUTION
:
Make sure the projector is equipped with an ECR dimmer inside the projector and is
fi
tted with a
Night Vision lens. Refer to Night Vision lens installation manual for more details.
Before calibrating the ECR, make sure to disable the CLO. Ensure that the ECR and CCD are at 100% position,
otherwise set it to 100% from the Lamps menu. Refer to section "Dimmer set positions", page 118 for more
details.
180
R59770324 SIM 5W 22/12/2011
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...