![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408143.webp)
7. Advanced
A white bullet indicates the active setting
7.9.6.4
Dynacolor adjustments
Overview
•
•
Calibration for the standard mode (for multiple projectors)
•
•
7.9.6.4.1
Introduction
Standard Dynacolor adjustment procedure (multiple projectors)
The adjustment of Dynacolor consists of :
1.
Measuring the color values for each projector (Calibration procedure)
2.
Calculating the common values
fi
lling them in the desired value of every projector
The In
fi
tec Dynacolor calibration can also be done over multiple projectors. Common values must be calcu-
lated and
fi
lled in every projector.
In case one uses linked Dynacolor, the master projector will calculate the common values and force them on
all (the linked) slave projectors
7.9.6.4.2
Calibration for the standard mode (for multiple projectors)
What has to be done ?
The calibration of Dynacolor consists of measuring the color values of each projector. The measurements have to be done in a
dark environment. Make sure all external lights are off (even a PC screen can produce too much unwanted light). Use a light
meter (PR655, LMT, …) and at a
fi
xed position during the entire measurement. In the procedure below we consider a system of 2
projectors.
C
AUTION
:
Only to be done by quali
fi
ed personnel ! Never change the values if not needed. Altered color
values will not guarantee optimal image reproduction.
How to calibrate Dynacolor for projector 1 ?
1. Select
Adjust Set1...
(see procedure above)
2. Press
Calibration
in the dialog box
A red test pattern is displayed.
3. Press
ENTER
R59770324 SIM 5W 22/12/2011
139
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...