![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408132.webp)
7. Advanced
Image 7-144
5. Press
ENTER
The projection can also be interrupted using the PAUSE key on the RCU. To restart the image projection press
PAUSE
7.8.3
Freeze
Freezing the image
With the Freeze function, the image can be frozen. To restart the image, reuse the Freeze function or press the
FREEZE
button on
the remote.
How to freeze the image ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Freeze
Image 7-145
5. Press
ENTER
to activate the Freeze function
The image can also be frozen using the FREEZE key on the RCU
7.8.4
Standby Timer
What can be done ?
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down after a pre determined
time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Standby Timer
128
R59770324 SIM 5W 22/12/2011
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...