Seam detector
Open connectivity - standard protocols
Applications
Concept
Specifications
Sensor
:
Sensor type:
Hall sensor
Temperature range:
-20 - 125°C
IP rating:
IP 65
Dimensions:
97 x 65 x 35 mm (w x h x d)
Amplifier
:
Temperature range:
-10 - 60°C
IP rating:
IP 30
Power supply:
24V DC
• Sensitivity adjustment
The sensitivity of the unit can be
adjusted, using a potentiometer.
At maximum sensitivity the passing
of the supplied magnet, when
correctly orientated, will be detected
at a distance of at least 250mm.
• Use of dual sensors:
Only in case of very wide tubes: If
the fabric can move more than
150mm from side to side it may be
advisable to use two sensors per
rope.
• Hall sensor - can be mounted
outside the machine.
• Can be used on most types of
fabric dyeing machines.
• The system comprises 3 parts:
amplifier, sensor head with 10
meters of cable, magnet for
sewing into the fabric seam.
• Amplifier can be mounted within
the control panel.
• Typical uses: stopping the machine
when the seam is found for
unloading, checking that the fabric is
circulating within a particular time
frame.
• The detector should be mounted on
a stainless bracket. This allows
enough cooling to keep the unit
well within operating temperature,
even at machine temperatures
higher than 125°C.
BARCO (BELGIUM)
Tel.: +32-56 26 26 11
Fax: +32-56 26 26 90
BARCO (UK)
Tel.: +44-12 54 66 22 44
Fax: +44 -12 54 58 25 95
BARCO (USA)
Tel.: +1 70 4 -3 92 93 71
Fax: +1 70 4-3 99 55 88
BARCO SEDO GmbH
. Neuwies 1
D-35794 Mengerskirchen . GERMANY
Tel.: + 49 - 64 76 - 31 0
Fax: + 49 - 64 76 - 31 31
E-mail: [email protected]
Internet: www.barcovision.com/sedo
