![background image](http://html1.mh-extra.com/html/barco/s3-series/s3-series_user-manual_3891629087.webp)
5. Front Panel Menu orientation
5.14 Restoring Factory Default Settings
General
As shown in the following illustration, two options in the
Setup
Menu allow you to restore the Event Master unit to its factory default
condition.
Image 5-31
The following attributes constitute a factory default condition:
•
The
Status
Menu is shown in the display screen.
•
All custom con
fi
gurations are deleted.
The
Factory Reset
Menu provides two options for restoring factory default settings:
•
Factory Reset
— If you use this option, all of your system con
fi
guration are deleted. Settings will be restored to the original
factory defaults.
•
Factory Reset, Save IP
— This option performs a factory reset, but retains the IP address of the unit.
It is advisable to clear all saved con
fi
gurations when you use the Event Master unit for the
fi
rst time, or when
returning an unit from an event.
Restoring all factory settings
To restore all default settings to the Event Master unit, use the following procedure:
1. Select
Factory Reset
from the
Setup
Menu.
The
Factory Reset
Menu appears.
2. Select
Factory Reset
.
A prompt appears, asking if you want to clear all con
fi
gurations.
3. Press
SEL
.
The system turns off, then reboots.
If you press
ESC
to cancel the operation instead, your custom settings remain in place and you are returned to the
Factory
Reset
Menu.
Retaining the IP address when restoring factory settings
To restore default settings to the Event Master unit but retain the unit’s IP address, use the following procedure:
1. Select
Factory Reset
from the
Setup
Menu.
The
Factory Reset
Menu appears.
2. Select
Factory Reset, Save IP
.
A prompt appears, asking if you want to clear all con
fi
gurations.
3. Press
SEL
to reset the system but save the IP address.
The system turns off, then reboots.
If you press
ESC
to cancel the operation instead, your custom settings remain in place and you are returned to the
Factory
Reset
Menu.
R5905948 EVENT MASTER DEVICES 17/07/2017
83
Summary of Contents for S3 series
