RLS W12 02/12/2014
68
14.Lamp and Filter Maintenance
4. Use a screw driver to loosen the screws as shown in the illustration.
5. Pull the lamp out.
6. Insert the new lamp in the direction shown in the illustration into the lamp assembly; tighten the two screws using a
screw diver and make sure the lamp is firmly secured to prevent the lamp from shaking or poor contact.
7. Replace the lamp cover and firmly secure the four screws on the lamp cover.
Summary of Contents for RLS W12
Page 1: ...RLS W12 User manual...
Page 88: ......