29 of 123
Barco RLM W12 Operation Commands
Command
Item
Operation
Commands
Values
Notes
0.9
darkTm.sel
= ?
0 = 650 us
1 = 1300 us
2 = 1950 us
Note 19
0.10
3dsync.inv
= ?
0 = off
1 = on
Note 19
0.11
3dsync.dly
= ? + -
-32768 ~ 32767
Note 19
In microseconc
REMARK: An input command will get back with
“NA” when the input command is “Not Applicable”
in some specific conditions.
Note1:
Not applicable in standby mode.
Note2:
Not applicable in standby mode or without signal locked.
Note3:
Not applicable when
picture mute is on.
Note4:
Only valid when source is one of Composite, S-Video and RGB-S.
Note5:
Native aspect ratio is not applicable when zoom is set to
“Zoom”; Letterbox aspect ratio is not
applicable when the input format is one of formats as listed in appendix 2.
Note6:
S
election
“Zoom” is not applicable when aspect ratio is set to Native.
Note7:
Only applicable when
source is one of RGB D-15, YUV1 and RGBHV/YUV2.
Note8:
Not applicable
when color space is set to custom.
Note9:
pip.sel can NOT be set to 0.
Note10:
Not applicable
when pip is off.
Note11:
Not applicable
when lamp is cooling.
Note12:
Not applicable when eco.net.pow is on.
Note13:
Only MCU version number will be read back in standby mode.
Note14:
Not applicable when the internal pattern is displayed.
Note15:
The summation of the absolute value of h.keystone and v.keystone should not be greater
than 350.
Note16:
Per Geo Semi’s specification, the minimum blend size is 200, values in the range 1~199 are
not allowed
Note17:
Per Geo Semi’s specification, black level (position) adjustment will only work with an active
white level setting on the corresponding side.
Note18:
When scen.red, scen.green, scen.blue values are not equal, the command will get back
“
NA
”
in reading.
Note19:
Only available when “STEREO DVI” source is active
Summary of Contents for RLM-W12
