5. Configurator
5.3
Create a new con
fi
guration
Steps to be taken
1. Click
File
on the menu and select
New
→
New con
fi
guration
(a). (image 5-2)
Or,
press
Ctrl
+
N
.
The
New con
fi
guration
dialog box opens (b).
2. Fill out a name for the new con
fi
guration next to
Con
fi
guration
name. The default name will be
Con
fi
g-
uration_’digit’
(c).
Note:
Only the characters a to z, A to Z, 1 to 9 and (, ), _, -, @ or allowed in a name.
When it is the
fi
rst con
fi
guration for this workspace, only the option
Create by adding projectors
is avail-
able.
When there are already con
fi
guration available, the option
Based on available con
fi
guration
becomes
available
3. Check the radio button of your choice (d).
4. When
Based on available con
fi
guration
is checked, click on the combo box and select the con
fi
guration
on which the new con
fi
guration must be based on (e).
5. Click
OK
to create the new con
fi
guration (f).
Image 5-2
Create new con
fi
guration
5.4
Add device to a con
fi
guration via scanning
What can be done ?
The network is scanned for possible devices which can be added to the con
fi
guration. The overview list
shows all possible devices on the network and not only the devices with an installed plug-in. Even the
devices which are already in the con
fi
guration are in the list.
Multiple devices can be added at the same time. It is not possible to add a device twice or to add a device
for a non installed plug-in.
44
R59770513 RLM W-SERIES 28/07/2010
Summary of Contents for RLM W Series
