Barco RLM H5 Owner'S Manual Download Page 26

Page: 26 / 165

3. Connections

3.2

Input Source Connections

Overview

•

Input section

•

Input facilities

3.2.1

Input section

Input Layers

The input section is divided in layers, each of them regrouping several inputs, this architecture allows the input section to be upgraded
at any time with an optional analog or digital layer.
1.

Layer 1: analog layer containing analog data and video inputs.

Layer 2: a hybrid layer containing 2 digital and 1 analog input.

Layer 3 : (HD)SDI and interconnection.

Layer 4 : is interconnection layer, with XLR connection and an optional Ethernet connection.

3.2.2

Input facilities

overview

•

5–cable input
- component video (PR/Y/PB)
- RGBS

•

composite video

•

S-Video

•

Digital Visual Input (DVI)

•

Computer (analog RGB)

•

Serial Digital Input or High Definition Serial Digital Input with loop through connection

R5976817 RLM H5 02/06/2006

Summary of Contents for RLM H5






































































































































































Search results

Summary of Contents for RLM H5

Reviews:

Related manuals for RLM H5

Brands by name

Popular brands

Barco RLM H5, Owner'S Manual

Search results

Summary of Contents for RLM H5

Reviews:

Related manuals for RLM H5

Brands by name

Popular brands