Barco RETRO GRAPHICS 2100, Installation Manual

Page: 10 / 17

3-3
5975978 RETRO GRAPHICS 2100 220198
Power Up Considerations
 The rightside panel must next be removed. The rightside panel is
removed by loosening its attaching screws and then pivoting out-
wards the front edge of this panel a little, now pull the front edge out
to release it.
Πb. Once the front panel has been removed the internal projector
and loud speakers are visible. The right loud speaker is of significance
since, if it is chosen to remove the projector from the front direction,
then this speaker must also be removed first. This is done by removing
all four of its attachment nuts on the top and right pillars of the lower
cabinet structure.
 a. Once the right panel has been removed the projector rightside
bracket locking screw is visible. A mental note of this screws
location should be made as it will be required to be undone in stage
 .
Ž ,a. The leftside panel is removed by removing all its fixing screws
both on the front and back. Once the screws are removed gently lever
evenly out of its position.
Œ
b
PROJECTOR
RIGHT
SPEAKER
RIGHTSIDE
PANEL FIXING
SCREWS


a
PROJECTOR
RIGHTSIDE BRACKET
LOCKING SCREW
î
í
LEFTSIDE
PANEL FRONT
FIXING SCREWS
Ž
Ž
a
LEFTSIDE
PANEL BACK
FIXING SCREWS
î