9-3
Installation Mode
5975498A BARCOREALITY 9200LC 150997
The pattern shows lines of one pixel.
Near six lines on the displayed pattern, a screw is drawn with a
number next to it (e.g. if displayed in green = corresponding with the
screws and numbers on the green LCD panel).
When turning a screw in the direction marked by the arrow above the
displayed screw on the screen, the line on the screen moves in the
direction of the straight arrow.
Green focusing
a. Adjust the projection lens until optimal focus for the green line 3 is
obtained (hint : use the focusing marker lines next to the indicated
points)
b. Turn screw 1 for optimal focus of the corresponding green line 1 on
the screen.
c. Turn screw 2 for optimal focus of the corresponding green line 2 on
the screen.
d. Turn screw 3 for optimal focus of the corresponding green line 3 on
the screen.
The three alignments influence slightly each other, therefore repeat
if necessary the above three steps (b,c and d).
When the green pattern is correctly focused, press
EXIT
to return to
the
Convergence
menu.
Red on green convergence.
Use the control disk to hightlight
Red on green
and press
ENTER
to
display the Red on green test pattern.
The longest lines are the red lines. These lines must be converged
with the green lines.
The drawn screws and numbers are displayed in red.
Follow next steps :
a. Adjust first screws 1, 2 and 3 to obtain an optimal focus for
respective lines 1, 2 and 3.
Due to slightly interaction, it may be necessary to repeat steps a.
Follow next steps to converge the red lines with the green lines :
b. Start with screws 4 and 5 to adjust for optimal convergence of
respective lines 4 and 5.
c. Adjust screw 6 for optimal convergence of line 6.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with or
then <ENTER>
<EXIT> to
return
.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with or
then <ENTER>
<EXIT> to
return
.
3
6
2
1
4
5
To adjust the convergence, there are test patterns provided in the
convergence menu.
Use the control disk to hightlight
Convergence
and press
ENTER
to
display the
Convergence
menu.
Start with the Green test pattern and continue with the Blue on green
and finish with the Red on green.
Use the control disk to select
Green
and press
ENTER
to display the
green pattern.
3
6
2
1
4
5
Summary of Contents for REALITY 9200LC R9001227
