background image

8-8

Random Access Adjustment Mode

5975928 BARCOREALITY 010998

3

Dynamic Color Depth

Increases color contrast for all video and data sources.

Highlight Dynamic color depth by pushing the control disc up or down

and press 

ENTER

 to select.

OFF : default position

MED : maximum color contrast without change in color tint or loss of

detail.

MIN : half of the effect of MED.

MAX : maximum color contrast.

Gamma

With the gamma correction adjustment, it is possible to accurately set

the gamma of the projector image.

To change the gamma value, highlight Gamma by pushing the control

disc up or down and press 

ENTER

.

PICTURE TUNING

SYNC [SLOW]

STILL VIDEO [ON]

COLOR TEMPERATURE

GAMMA

DECODING [EBU]

GAMMA = 2.2

Decoding EBU/IRE

Only for NTSC signals.

The possibility is offered to decode the NTSC video signals via the

default American IRE standard or via the European EBU standard.

Decoding a NTSC signal using the European EBU standard may result

i a greenish tint.

Highlight Decoding by pushing the control disc up or down and press

ENTER

 to select.

Select with        or

then <ENTER>

<EXIT> to return.

PICTURE TUNING

CTI [ON]

STILL VIDEO [ON]

COLOR TEMPERATURE

GAMMA

DECODING [EBU]

DYNAMIC COLOR DEPTH

NOISE REDUCTION

EDGE ENHANCEMENT

Select with        or

then <ENTER>

<EXIT> to return.

PICTURE TUNING

CTI [ON]

STILL VIDEO [ON]

COLOR TEMPERATURE

GAMMA

DECODING [EBU]

DYNAMIC COLOR DEPTH

NOISE REDUCTION

EDGE ENHANCEMENT

Select with        or

then <ENTER>

<EXIT> to return.

Noise Reduction

Reduces noise and pixel jitter in all video and data sources.

Highlight Noise reduction by pushing the control disc up or down and

press 

ENTER

 to select.

Auto : maximum noise reduction without motion blur.

PICTURE TUNING

CTI [ON]

STILL VIDEO [ON]

COLOR TEMPERATURE

GAMMA

DECODING [EBU]

DYNAMIC COLOR DEPTH

NOISE REDUCTION

EDGE ENHANCEMENT

OFF

DYNAMIC COLOR DEPTH

MIN

MED MAX

NOISE REDUCTION

MIN

AUTO

MAX

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for REALITY 8200 TCR+




























































Reviews: