![background image](http://html1.mh-extra.com/html/barco/r9841020-cine-versum-master/r9841020-cine-versum-master_installation-manual_4236570037.webp)
6. Installation Guidelines
6. INSTALLATION GUIDELINES
Overview
•
Projector Installation Guidelines
•
Plasma Screen Installation Guidelines
6.1 Projector Installation Guidelines
Overview
•
General Installation Guidelines
•
6.1.1
General Installation Guidelines
Before installing the projector, read first the safety instructions.
Temperature and humidity conditions
•
The installation site should meet the following conditions:
- Operating temperature: 10 to 35 °C (largely depending on installation conditions)
- Operating humidity: 0 to 98% RH Non-condensing
- Storage temperature: –35 to +65°C
- Storage humidity: 0 to 98% RH Non-condensing
- Operating atmospheric pressure: 700 to 1100kPa
- Storage atmospheric pressure: 600 to 1500 hPa
•
We recommend against installing electronic products such as this unit in locations subject to high humidity. If the unit is to be
installed in a location subject to relatively high humidity, observe the following:
- Failure to install the unit in unacceptable ways may result in non-warranty damages.
- Make sure the unit is grounded.
- Do not allow water or other liquid to enter the unit.
Environment
Do not install the projection system in a site near heat sources such as radiators or hot air ducts, or in a place subject to direct
sunlight, excessive dust or humidity. Be aware that room heat rises to the ceiling, prevent that the temperature near the installation
site becomes too excessive.
Environment condition check
A projector must always be mounted in a manner which ensures the free flow of clean air into the projectors ventilation inlets.
For installations in environments where the projector is subject to airborne contaminants such as cigarette smoke or similar (these
deposit a layer of greasy residue upon the projectors internal optics and imaging electronic surfaces, degrading performance), then
it is highly advisable and desirable to have this contamination removed prior to it reaching the projectors clean air supply. Devices or
structures to extract or shield contaminated air well away from the projector are a prerequisite, if this is not a feasible solution then
measures to relocate the projector to a clean air environment should be considered.
Only ever use the manufactures recommended cleaning kit which has been specifically designed for cleaning optical parts, never
use industrial strength cleaners on a projectors optics as these will degrade optical coatings and damage sensitive optoelectronics
components. Failure to take suitable precautions to protect the projector from the effects of persistent and prolonged air contami-
nants will culminate in extensive and irreversible ingrained optical damage. At this stage cleaning of the internal optical units will be
non-effective and impracticable. Damage of this nature is under no circumstances covered under the manufactures warranty and
may deem the warranty null and void. In such a case the client shall be held solely responsible for all costs incurred during any
repair. It is the clients responsibility to ensure at all times that the projector is protected from the harmful effects of hostile airborne
particles in the environment of the projector. The manufacture reserves the right to refuse repair if a projector has been subject to
wilful neglect, abandon or improper use.
Which screen type ?
There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear
projection applications.
R5976468 CINE VERSUM SYSTEM 03112003
33
Summary of Contents for R9841020 Cine VERSUM Master
