Barco R9841020 Cine VERSUM Master, Installation Manual

Page: 144 / 161

20. Cine VERSUM Master Settings & Info
Explanation about the identification items
The identification menu shows the general information of the Cine VERSUM Master status.
• IR Address: typical address of the Cine VERSUM Master, to be used by the Remote Control to allow communication.
• Soft Version: the loaded software version. This version number can be useful when calling for service assistance.
• Baudrate PC: transfer speed for communication with an IBM PC (or compatible) or MAC. The baudrate must be the same as
the baudrate of the connected computer.
• Serial no: the fabrication number of the Cine VERSUM Master. This number can be useful when calling for service assistance.
• Run Time: total run time since the first start up.
• Link Time: below Link Time item, the creation date and time of the loaded software is shown.
20.3 Cine VERSUM Master Password
How to activate the password protection
To prevent user’s modify system set ups, entering the service and installation menu can be password protected. Follow next steps:
1. Select item
PASSWORD
in the Service menu by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control.
2. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The sub menu PASSWORD appears on-screen and in the graphical display, including the activation, Yes or No, of the password
function and the possibility to change the password (4 digits). (menu 20-3)
3. Select item USE PASSWORD [No] by rotating the jog dial on the Master or the ↑ or ↓ keys on the Remote Control.
The status of the password function is indicated between brackets. To change the status, continue with step 4.
4. Press the jog dial on the Master or the key ENTER on the Remote Control to change the status from Yes to No and back.
Status [Yes]: entering the Installation as well as the service menu is password protected (after the Cine VERSUM System has
been shut down and restarted).
Status [No]: Installation and Service menu are accessible all the time.
5. Press the key EXIT on the Remote Control or select Back in the graphical display by rotating the jog dial on the Master followed
by pressing the jog dial to confirm, to return.
Password
Use Password: [No]
Modify Password
Back
Menu 20-3
140 R5976468 CINE VERSUM SYSTEM 03112003