Barco R9841020 Cine VERSUM Master, Installation Manual

Page: 140 / 161

19. Picture in Picture (PIP)
Image 19-1
Picture in Picture
When a PiP window is on the screen, zapping over inputs change only the PiP window. When the same source
is pressed twice, the selected source becomes the main window and the PiP window disappears.
19.3 Configuration of the PIP Window
How to configure the PIP window manually
1. Select the PIP Configuration menu (Turning On/Off the Picture in Picture, page 135).
2. Select the item you desire to adjust by rotating the jog dial on the Master or the up/down arrow keys on the Remote Control.
(menu 19-3)
3. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The corresponding bar scale appears on-screen and in the graphical display of the Master. (image 19-2)
4. Adjust the Size or Shift (Position on the image)
- With the Remote Control: press the ↑ and ↓ key for Top/Bottom blanking, and the ← and → key for Left/Right blanking.
- With the selection wheel on the Master: rotate the jog dial to the left or to the right.
5. Press EXIT on the Remote Control or press the jog dial on the Master to return.
PIP Configuration
PIP [Yes]
Horizontal Shift
Horizontal Size
Vertical Shift
Vertical Size
Back
Menu 19-3
Image 19-2
PIP configuration
How to configure the PIP window quickly
The function keys F1 to F5 on the Remote Control have the following action:
136 R5976468 CINE VERSUM SYSTEM 03112003