BARCO 2
Projection Systems
QFD(4.5-6:1) Lens (Motorization excluded)
R9840100
Installing the
Lens
To install the lens, follow the next procedure or look into the owners manual :
1
2
3
4
5
6
1
1
2
1&2
2
2
Flip the top of the lens locks (A) backwards over the lock
pin (B).
Rotate the lens locks towards you to open.
Place the lens unit in the projetor in a way the lens holder
fits the lens support.
Secure the position of the lens unit by closing both lens
locks (A) until the top of the lens locks flip over the lock pin
(B).
Loosen the wing nut (C) of the motorization unit and push
the unit against the lens ensuring a correct gear transmis-
sion.
Secure the posiotion of the motorization unit by tightning
both wing nuts.
Step
Action
Image
Warning !
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
Illustrations
Image 1
Image 2
A
B
C
