Descriptions & Connections
R597612 BARCO T
WIN
I
NTERFACE
____________________________________________________ 2-1
APPLICATION GLOBAL
Purpose of this interface is to take RGB signals from a computer and to display them on a large screen
projector, while keeping the image on the monitor intact.
As IBM and Apple computers need monitor identification for soft and hardware configuration purposes,
emulation of these identification bits is provided in case no monitor is connected.
In case a monitor is connected, the identification bits of the monitor are fed to the computer.
To obtain the best performing images on the large screen-projecting device, active loop-trough is used
for the monitor output.
RGB signals from the computer are automatically terminated to 75 Ohm, while sync signals, which are
TTL signals are terminated with a 22K pull-up resistor.
SPECIFICATIONS TWIN INTERFACE:
Measured bandwidth : >300MHz @ -3dB.
Rise and fall time better than 1.42 ns
Gain fixed to 1. (Output = Input)
Input
: R,G,B, :0.7 Vpp (no sync) or 1Vpp With sync @ 75 Ohm
Sync
: TTL level
Output signals :
Loop trough output on DD15 connector:
R, G, B: 0.7 Vpp (no sync) or 1Vpp @ 75 Ohm
Horizontal Sync: TTL
Vertical Sync: TTL
Composite Sync: TTL
Output to projector on 5 BNC connectors:
R,G,B: 0.7 Vpp (no sync) or 1Vpp @ 75 Ohm
Horizontal Sync: 1.54Vtt
Vertical Sync: 1.54Vtt
Composite Sync: 1.54Vtt
Power supply: Auto ranging Power Supply 87-240V AC 50/60Hz
DESCRIPTIONS & CONNECTIONS
2
Summary of Contents for R9828960
Page 4: ......
