Barco R9802352, Installation Manual

Page: 9 / 16

9 R5914789 /00 UDX Bottom filter
3
4
5
6
Image 2 – 1 Location of the skew actuator
3. Release two of the M8 screws and washers mounted into the bottom of the rigging frame, as indicated in
the following picture (reference 1,
Image 2 – 2 ). Use a 6 mm Allen wrench.
4. Release two of the M4 screws on the bottom plate of the projector as indicated in the following picture
(reference 2,
Image 2 – 2 ). Use a 3 mm Allen wrench
1
2
Image 2 – 2 Location of the screws to be removed
5. Place the three filter foam pieces in the appropriate openings, as indicated in the following picture
(
Image 2 – 3 ).
Bottom filter