![background image](http://html1.mh-extra.com/html/barco/r9006332b1/r9006332b1_user-manual_4250685039.webp)
RLM W14 17/04/2017
31
4.Physical Installation
C
AUTION
: Once the projector is switched to standby, the lamp cooling fans will continue to run for approx-
imately five minutes to ensure that the projector and lamp have sufficiently cooled, at which point the
fans will automatically decrease to standby. To avoid thermal stress that can lead to premature lamp
failure, never unplug the power cord while the lamp cooling fans are running. Never unplug the power
cord to power down the projector, first switch off the power switch and then unplug the power cord.
4.6 Alignment of a table mounted projector
How to align the projector
1. Place the projector in the desired location. Take into account the zoom range of the used lens and the size of the screen.
2. Project one of the internal hatch patterns on the screen.
3. Turn the adjustable feet in or out until the projected hatch pattern has a perfect rectangle shape and is leveled.
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
SCREEN
Angle adjustment
SCREEN
Angle adjustment
Summary of Contents for R9006332B1
Page 1: ...RLM W14 User manual...
Page 92: ......