![background image](http://html1.mh-extra.com/html/barco/r9006330/r9006330_user-manual_474305036.webp)
RLM W14 17/04/2017
28
4.Physical Installation
Make sure to hold the lens lever fully when install the lens (or remove the lens)
C
AUTION
: Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
Lens focus
Press the button
MENU
on the remote control or
MENU
on the projector panel, Choose OSD -> LENS FOCUS , then use the
buttons to adjust the lens' focus (clarity).
—>
L
ens Focus :
To adjust the lens focus with the RCU press “enter” when the OSD is not active.
Lens zoom
Press the button
MENU
on the remote control or
MENU
on the projector panel, Choose OSD -> LENS ZOOM , then use the
buttons to adjust the size of the image that is projected onto the screen.
Original image size
Zoom out
Zoom in
L
ens Zoom:
To adjust the lens zoom with the RCU press “enter” when the OSD is not active
Lens Shift
In addition to using the adjustable feet to adjust projection angle, you can also use the Lens Shift function to adjust the
projected image.
• Moving the lens vertically
The distance of vertical lens movement is +100% , -30% of half the screen height in both directions.For instance, if you are
using a 80" × 50" screen, you will be able to move the image upwards no more than 27.5'' or downwards no more than
17.5''.
Summary of Contents for R9006330
Page 1: ...RLM W14 User manual...
Page 92: ......