Barco R9006330, User Manual

Page: 34 / 92

RLM W14 17/04/2017
26
4.Physical Installation
4.2 Lenses
Available lenses for the RLM W14 projector projector
• R9862000-TLD+ (0.73:1)
• R9801414-TLD+ (0.8 - 1.16:1)
• R9840776-TLD+ (1.2:1)
• R9862010-TLD+ (1.5 - 2.0:1)
• R9862020-TLD+ (2.0 - 2.8:1)
• R9862030-TLD+ (2.8 - 4.5:1)
• R9862040-TLD+ (4.5 - 7:5:1)
• R9829997-TLD+ (7.5 - 11.2)
• R9862005-TLD+ Ultra (1.25-1.6)
Projection lenses are optional accessories. Please contact your local dealer to acquire the projection lens
that suits your need most.
4.3 How to Mount the cable
The lens safety cable must be used in any circumstances to protect a mounted lens in the lens holder.
1. Paste four cable clips on the lens as illustrated (reference 1). Orient the open side of the clips towards the front of the
lens.
1
2
image A
1
2
image B
2. Snap the first loop end of the safety cable into one of the following clips and let the loop end point downwards.
a) Configuration A: Use the upper clip on the side of the cable bundle (reference image A).
b) Configuration B: Use the upper clip on the non-wired side (reference image B).
3. Slide the rest of the cable around the lens counterclockwise. Click the cable into every clip it passes in this loop.
Note: Make sure the cable passes between the lens and the cable bundle.
4. Slide the cable through the loop end at the beginning of the cable.