Barco R9004460, Owner'S Manual

Page: 70 / 133

6. Adjustment Mode
6.5.2 Select Source
What has to be done ?
The source (window) on which the adjustments should be performed can be selected with this menu item.
A source is displayed within a window.
How to select
1. Push the cursor key ↑ or ↓ to highlight
Select Source
. (menu 6-44)
2. Press ENTER to select.
A window select message will be displayed. (menu 6-45)
3. Enter the source number with the digit keys on the remote control. Press ENTER or wait a while. The message disappears.
WINDOW ADJUSTMENT
SELECT SOURCE
SIZE
POSITION
Z-ORDER
COLOR KEY
ALPHA BLEND
NO SIGNAL COLOR
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-44
Window select
Select Source (1 - 4)
<EXIT> to return
Menu 6-45
Direct source selection of the PiP window is possible by pressing PiP source number.
6.5.3 Size Adjustment
What can be done ?
The size of the active window can be adjusted in a vertical or horizontal way.
When adjusting the vertical size, the upper side of the image is fixed (table and ceiling mounted configurations) and only the lower
side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
66 R59770014 XLM HD30 07/07/2006