![background image](http://html1.mh-extra.com/html/barco/r9004460/r9004460_owners-manual_4265878106.webp)
8. Service
4. Press
ENTER
to toggle between RS232 and RS422.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
BROADCAST MODE [OFF]
DIAGNOSIS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-11
COMMUNICATION
BAUDRATE [115200]
INTERFACE STANDARD[RS232]
RS422 TERMINATION [OFF]
NETWORK
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-12
8.4.3
RS422 Termination
Set up
The last projector in a line should be RS422 terminated (ON position). All others in the line should be in the OFF position. To change
the termination position:
1. Push the cursor key
↑
or
↓
to highlight RS422 Termination. (menu 8-13)
The actual setting will be displayed.
2. Press
ENTER
to toggle between
ON
and
OFF
.
Default : ON
COMMUNICATION
BAUDRATE [115200]
INTERFACE STANDARD[RS232]
RS422 TERMINATION [OFF]
NETWORK
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-13
8.4.4
Network Configuration
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage
centrally and automate the assignment of IP addresses in an organization’s network. Using the Internet Protocol, each
machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users
with a connection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address
must be entered manually at each computer and, if computers move to another location in another part of the network,
a new IP address must be entered. DHCP lets a network administrator supervise and distribute IP addresses from
a central point and automatically sends a new IP address when a computer is plugged into a different place in the
network.
What can be done?
The necessary network addresses (configuration) can be entered so that the projector can be connected to a LAN (local area net-
work).
Set up the network configuration
1. Push the cursor key
↑
or
↓
to highlight
Communication
. (menu 8-14)
2. Press
ENTER
to select.
The communication menu will be displayed. (menu 8-15)
3. Push the cursor key
↑
or
↓
to highlight
Network Configuration
.
4. Press
ENTER
to select.
The Network Configuration menu will be displayed (menu 8-16)
102
R59770014 XLM HD30 07/07/2006
Summary of Contents for R9004460
