Barco R9004460, Owner'S Manual

Page: 82 / 133

6. Adjustment Mode
The
Edit window
menu is redirected to the
Window adjustment
menu.
LAYOUT ADJUSTMENT
LOAD
RENAME
DELETE
ADD WINDOW
REMOVE WINDOW
EDIT WINDOW
KEYSTONE
BLANKING
INPUT LOCKING
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-74
6.6.8 Keystone adjustment
What can be done ?
The keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle. The keystone
adjustment influences the complete projected image (even when the image is composed by different windows).
Image 6-18
Keystone adjustment
How to adjust the keystone
1. Push the cursor key ↑ or ↓ to highlight
Keystone
. (menu 6-75)
2. Press ENTER to select.
3. Push the cursor key ← or → to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the cursor key ← . The value indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key
→ . The value indication below
the bar scale will be positive.
LAYOUT ADJUSTMENT
LOAD
RENAME
DELETE
ADD WINDOW
REMOVE WINDOW
EDIT WINDOW
KEYSTONE
BLANKING
INPUT LOCKING
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-75
6.6.9 Blanking adjustment
What can be done ?
Blanking adjustments affect only the edges of the complete projected image and are used to frame the projected image on to the
screen and hide or blank out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking.
78 R59770014 XLM HD30 07/07/2006