Random Access Adjustment Mode
R5976101 BARCO CINE 5 ___________________________________________________________________________________
6-3
Custom Color Balance :
Select Custom White balance with the arrow keys and press '
ENTER
'
to start the adjustment.
Use the up and down arrow keys to adjust the RED gain or the left and right arrow keys to adjust the BLUE gain. A bar scale
indicates the amount of adjustment. Same for GREEN.
Select Custom Black balance with the arrow keys and press Enter to start the adjustment.
Use the up and down arrow keys for RED or left and right arrow keys for the BLUE cutoff. Same for Green.
When the color balance is adjusted, press Exit to return to the Picture Tuning Menu.
Gamma
The
GAMMA
adjust function acts on the luminance content of the image. It has a non-linear amplification characteristic. At minimum
Gamma ( < 1 ), the lower parts of the signal are amplified with higher gain.
Decoding
Only for NTSC signals.
Highlight '
DECODING
' with the arrow keys. Pressing
ENTER
will toggle between EBU and IRE standards.
<EXIT> to return
then <ENTER>
or
Select with
PICTURE
GAMMA
COLOR
DECODING :
<EXIT> to return
then <ENTER>
or
Select with
PICTURE
TUNING
DECODING : EBU
GAMMA
ENTER
will select the GAMMA function
EXIT
will return to the Random Access Adjustment Menu
ENTER
will toggle Decodeing between EBU and IRE
EXIT
will return to the Random Access Adjustment Menu
<EXIT> to return
then <ENTER>
or
Select with
COLOR BALANCE
FIXED COLOR BALANCE
3200 4900 6500 9300
CUSTOM WHITE BALANCE
RED, BLUE & GREEN
CUSTOM BLACK BALANCE
RED, BLUE & GREEN
PORT 2 : S-Video
Port 2 can be used as a Video or S-Video input.
When connected to a S-Video this menu will appear automatically. Pressing enter
will toggle between S-Video & Video.
Toggling this to video will give a monocrome picture. Toggling to S-Video will again
give a color picture.
ENTER
will toggle PORT 2 between S-Video & Video
EXIT
will return to the Random Access Adjustment Menu
PICTURE TUNING
COLOR BALANCE
GAMMA
PORT 2 : S - VIDEO
<ENTER> to accept
<EXIT> to return
Select with
or
