Source Connections
6-8
5976195 BARCOCINE 9 31012002
Communication connections
Communication facilities :
1. RS232 in / RS232 out.
2. Comm port for communication with peripheral (switchable between PPM and RC5)
3. RC for remote cable connection with the RCU.
4. MOUSE to control a PC with the projector remote control.
5. TRIG : output voltage to control another device.
Peripheral types
The following source types can be connected to the inputs :
1
RCDVS 05 source selector
2
VS 05 source selector
3
IR remote receiver 800
Connecting a RCVDS 05 source selector
1
Up to 20 inputs with a RCVDS05 and up to 90 inputs can be accommodated when multiple RCVDS source selectors are
linked via a Expansion Module.
2
Serial communication with the projector.
3
Remote control buttons on the RCVDS05 to control the projector (source selection and analog settings).
4
The selected source number will be displayed on a 2-digit display and the selected input modules will be indicated with a LED
on the rear.
The order numbers for the RCVDS05 source selector :
RCVDS05 230 V
R9827880
RCVDS05 120 V
R9827889
For more information about the use of the RCVDS05, consult the RCVDS05 Owner's Manual - order number : R5975765.
Connecting a VS05 source selector
The VS05 can switch up to 5 Composite Video sources, 3 S-Video Sources and 1 RGB analog or component Video source to the
projector. In addition, the audio signal associated with the source, can be switched to an audio amplifier.
VS05 order number : R9827890.
For more information about the use of the VS05, consult the VS05 Owner's Manual - order number : R5975245.
Connecting an IR Remote Receiver 800
This infrared Remote Receiver makes it possible to control the projector from another room. There is a communication cable between
the IR Remote Receiver and the projector. The control information from the RCU can now be sent to the IR Remote Receiver 800. The
IR Remote Receiver 800 displays the selected source on a 7-segment display.
IR Remote Receiver 800 order number : R9827515.
Summary of Contents for R9002400
