Barco R9002240, Installation Manual

Page: 33 / 46

Installation adjustment mode
8-5 5975698 BARCOVISION 1609s 220198
Loosen bolts D, E and F to pivot the blue CRT until the center of the
Blue image and the center of the Green image coincide. When the
angle of the blue CRT is corrected, tighten the four bolts.
Press ENTER to continue with the diagonal focusing menu.
Press EXIT to return to the CRT projection angle adjustment.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
Blue crosshair
Green crosshair
Move the blue CRT to the out-
side, away from the green
CRT
Blue crosshair
Green crosshair
Move the blue CRT towards
the green CRT
Projection angle correctly aligned for screen width SW1.
The same projection angle is mis-aligned for new screen width SW2.
Re-alignment is necessary. Each screen width change requires
readjustment of the projection angle.
SW1
SW2
(SW1 > SW2)