![background image](http://html1.mh-extra.com/html/barco/r9001870/r9001870_owners-manual_4244463028.webp)
6. IMAGE CONTROL
Image 6-3
Image 6-4
6.3 Sharpness (Detail) Control
How to adjust the Sharpness
The Sharpness function is used to adjust the image sharpness of video signals when using a video decoder installed in the Cine
VERSUM Master.
To adjust the Sharpness, press the
(+)
or
(-)
side of the button ’
SHARP
’ (image 6-5). The following barscale is overlayed on the
source image,image 6-6.
Press the
(+)
or
(-)
button until the sharpest display is attained. Detail level should be roughly proportional to the input signal quality.
Higher levels of detail improve good quality levels. Low levels of detail reduce noise in poor quality signals.
Image 6-5
Image 6-6
24
R5976490 CINE VERSUM SYSTEM 17012003
Summary of Contents for R9001870
