6. IMAGE CONTROL
6.4 Color (Saturation) Control
How to adjust the Color (Saturation)
The Color function is used to adjust color saturation levels and is only active for Video and S-Video sources.
To adjust Color, press the
(+)
or
(-)
side of the button ’
COLOR
’ (image 6-7). The following barscale is overlayed on the source image,
Press the
(+)
or
(-)
button until the desired color saturation level is displayed. If color is set to a 0% level, the result will be black and
white picture. If the color is set too high, the color levels in the image will be over-powering.
Image 6-7
Image 6-8
6.5 Tint control
How to adjust Tint (Hue)
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when using
the NTSC4.43 or NTSC 3.58 color system. For PAL and SECAM sources, Tint is not adjustable.
To adjust Tint, press the
(+)
or
(-)
side of the button ’
TINT
’ (image 6-9). The following barscale is overlayed on the source image,im-
age 6-10.
Press the
(+)
or
(-)
button until an optimal display is obtained. It is best to adjust tint while displaying an image with natural flesh
tones.
R5976490 CINE VERSUM SYSTEM 17012003
25
Summary of Contents for R9001870
