Barco Prometheus III, Installation Manual

Page: 54 / 200

R5906897 /02 Prometheus III 54
A B
U
1
1
U
Image 5-20
1 Wall side
U U brackets location
A Portrait mode
B Landscape mode
When mounting the cooler assembly, the U brackets which will be mounted on the housing must be fixed to
the indicated position (U) on the frame.
• For portrait mode the U brackets must be mounted on top (cooling tubes will be facing upwards) .
• For landscape mode the U brackets are mounted on the left side (cooling tubes will be facing to the left).
Continue with “ Installing the brackets on the cooler housing ” , page 54.
5.5 Installing the brackets on the cooler housing
Required parts
• 2 front brackets (U-brackets)
• 2 equal rear brackets
• 4 Hex Screws M5x8
• 4 Hex Screws M5x12
How to install the brackets
1. Fixate the U-bracket (on both sides) to the side of the cooler housing with 2 screws (M5x12).
Physical installation stand alone cooler