Barco Projector Toolset Reference Manual Download Page 81

Page: 81 / 245

6. Configurator, General projector settings

Image 6-9
Test pattern selection

6.8

Advanced controls

Overview

•

•

•

•

•

•

•

Calibrate lens zoom and focus

•

Lens settings for all layouts

•

Auto picture alignment

•

LCD timeout settings

6.8.1

Input locking

What is possible?

The output signal can be locked on an internal sync signal or on the sync signal of one of the input sources.
Input locking can avoid that some windows in the output signal are slowly moving or trembling.

When automatic is selected, the lock will be set on the input signal of the main window.

How to set up

1. Click on

Advanced control

(a). (image 6-10)

The

Advanced control

dialog box opens.

2. Click on the combo box next to

Locking to

and select the desired setting (b).

R5976924 PROJECTOR TOOLSET 16/04/2009

Summary of Contents for Projector Toolset






















































































































































































































































Search results

Summary of Contents for Projector Toolset

Reviews:

Brands by name

Popular brands

Barco Projector Toolset, Reference Manual

Search results

Summary of Contents for Projector Toolset

Reviews:

Brands by name

Popular brands