Barco Projector Toolset, Reference Manual

Page: 203 / 245

13. Configurator, Warp User Interface
How to toggle hard edges on or off
1. Right click on the grid. (image 13-18)
The context menu opens.
2. Click on Show hard edges .
When the hard edges are hidden before the click, the hard edges will be visible and the check box in
the content menu will be checked.
When hard edges are visible before the click, menu item was checked, then the hard edges are hidden
and the check box becomes unchecked.
Image 13-18
Show hard edges
13.12 Save con fi guration to fi le
What can be done ?
A warping con fi guration can be save to fi le. This fi le can be reloaded for editing purposes or the saved
fi le can be uploaded on a device and activated via DMX commands
How to save to fi le
1. Click on the Save icon in the Floater menu (1a). (image 13-19)
Or,
right click on the grid to open the context menu and select
Save con fi guration fi le (1b).
The Save window opens (2). The warping fi les are normally stored in
[Projector Toolset in-
stall directory]/warping_configuration
.
2. Click on the fi le name input fi eld and enter a name for the fi le (3).
3. Click Save (4).
R5976924 PROJECTOR TOOLSET 16/04/2009 199