Barco Projector Toolset, Reference Manual

Page: 123 / 245

8. Configurator, Projector adjustment settings
Load via the input window
1. Select fi rst a window.
2. Click on Adjust (a). (image 8-11)
The Input dialog box is displayed (b).
3. Click File and select Load (FIT) (c).
A list of fi tting fi les is displayed in Load ( fi t) dialog box (d).
4. Select a fi le from the list (e).
5. Click Open or Select to load the selected fi le (f).
When a standard fi le is selected or a not exactly matching custom source fi le, Projector Toolset will ask
to create a new custom fi le by copying the settings of the selected fi le into the custom fi le.
6. Click OK to create a new custom source fi le. If Cancel is pressed the previous selected fi le is loaded
again.
The new created fi le can be edited.
Image 8-11
Load
fi tting fi le
8.5.3 Load a fi le from all fi les
What is possible?
A fi le can be loaded from the complete list of all fi les.
How to load
1. Select fi rst a window.
2. Click on Adjust (a). (image 8-12)
The Input dialog box is displayed (b).
3. Click File and select Load (ALL) (c).
A list of all fi les is displayed in Load (All) dialog box (d).
R5976924 PROJECTOR TOOLSET 16/04/2009 119