![background image](http://html1.mh-extra.com/html/barco/phwu-81b/phwu-81b_user-and-installation-manual_4204035109.webp)
12. Troubleshooting
Problem
Solution
Only the motion areas in the
images supplied from the
computer aren’t displayed.
This is caused by the computer being used. Contact the manufacturer of your computer.
Projected images are obscured.
•
Match the output resolution of your computer with the resolution of the projector. For
the method to change the output resolution of the computer, contact the manufacturer
of your computer.
•
Some images and texts appear obscured during the keystone adjustment. In such cases,
use the projector without applying the keystone adjustment.
•
When SUPER RESOLUTION is ON, the displayed image may be obscured. Set it to OFF.
Noise appears around the
image.
In some images such as DVD, noise may appear around the recorded image. In this case,
decrease the setting value of OVER SCAN in the SIGNAL menu or adjust the setting value of
SHUTTER in the USER menu of the SIGNAL menu.
The resolution setting on the
computer is different from that
displayed in INFORMATION
menu on the projector.
•
On the computer, display the images containing many characters such as a text document
so that the screen becomes bright as much as possible, and then execute AUTO
POSITION.
•
Perform RESOLUTION (MEMORIZE) in the SIGNAL menu.
•
Depending on the computer, the images may be output in the different resolution from the
setting. In such a case, consult the computer manufacturer.
The projected images have
blown-out highlights or
blocked-up shadows.
•
Adjust the input level of ADVANCED menu in the IMAGE menu
•
Set COLOR ENHANCER in the IMAGE menu to the setting such as STANDARD and
sRGB.
Images of WXGA signal are not
displayed correctly.
Make adjustment according to “How to adjust the computer image”
12.3 Other problems
Overview
Problem
Solution
The exhaust vents emit warm
air.
This air comes out after cooling the inside of the projector. You may feel hot, but this is not
a malfunction.
The menu can’t be used.
•
The microcomputers inside the projector may be wrongly operating because of noise.
→
Press the POWER key to turn off the lamp, wait for about 2 minutes and unplug the
power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
•
You cannot select (or set) grayed-out items. Whether items can be selected or not
depends on the presence of an input signal at the time when the menu is displayed, the
type of such input signal, and other conditions.
“HIGH TEMP WARNING” is
displayed.
•
This indication appears when the ambient temperature rises high. When the ambient
temperature stays high, the lamp goes out.
→
Eliminate any causes of the rise in the ambient temperature.
•
This indication appears when the intake or exhaust vents are blocked. When they are
kept blocked, the lamp goes out.
→
Remove the objects blocking the intake or exhaust vents.
The mark Ø appears.
This mark appears when ineffective operation is carried out. This isn’t a product malfunction.
This mark appears when
ineffective operation is carried
out. This isn’t a product
malfunction. The remote
control doesn’t function easily
or at all.
•
Check that the batteries are loaded in the remote control or the batteries are not weak.
•
Check that the remote control sensor isn’t exposed to direct sunlight or
fl
uorescent light.
•
Use the remote control within its operation range.
•
Use the remote control at least 10 cm away from the projector.
•
Check that the projector isn’t controlled by a control panel or other device that is
connected to the REMOTE 1 IN terminal.
•
Check that the REMOTE 2 IN and OUT terminals are not used.
R5905597 PHXX SERIES 20/05/2014
105
Summary of Contents for PHWU-81B
