![background image](http://html1.mh-extra.com/html/barco/overview-d-series/overview-d-series_user-manual_4198086014.webp)
1. Preliminary Remarks
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
________________________________________________________________________
1-6
On Servicing
Do not attempt to service this device yourself, as opening or removing covers may expose you to dangerous
voltage potential and risk of electric shock! Refer all projector service to a qualified Barco service center.
Adjust only those controls that are covered by the operating instructions since improper adjustment of the other
controls may result in damage and will often require extensive work by a qualified technician to restore the
product to normal operation.
Call for service in the following conditions :
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the device.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the operating instructions are followed.
•
If the product has been dropped or the cabinet has been damaged;
•
If the product exhibits a distinct change in performance, indicating a need for service.
When replacement parts are required, be sure the service technician has used original Barco replacement parts
or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized
substitutions may result in degraded performance and reliability, fire, electric shock or other hazards. Unauthor-
ized substitutions may void warranty.
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
1.4.1
Precautions
For your own protection, observe the following safety precautions when installing your device!
•
Observe all warnings and instructions printed on the devices!
•
Check that the voltage and frequency of your power supply match those printed on the device label with the
rated electrical values!
•
Servicing not explicitly mentioned in this manual should never be carried out by unauthorized personnel!
1.4.2
Unpacking of devices
Note advises on the packaging for unpacking!
1.4.3
Modification of devices
Mechanical or electrical modifications others than described in this manual must not be made to the devices.
Barco is not liable for damages resulting from modified devices.
Only authorized personnel should carry out other maintenance work not explicitly men-
tioned in this user's manual!
Never open the case of the power supply or of the projection unit without first discon-
necting the power supply cord! Measurements and tests with an opened device may be
carried out only in the factory or by specially trained personnel, due to the dangers of
electrical shock.