![background image](http://html1.mh-extra.com/html/barco/overview-d-50/overview-d-50_installation-manual_4197749008.webp)
1. Assembly of support frame
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________1-3
1.2
Required tools
Quantity
Quantity
Quantity
Quantity
Description
Description
Description
Description
1
Torx key size 30
1
Allen key size 6
Table 2
List of required tools
1.3
Assembly of left and right frame
The following picture shows how to assemble both frames.
Figure 1-2
One of the profiles PU I 7 is equipped with 3 more counter nuts than the other. This profile must be installed at
the right side of the support frame (rear view).
It is very important that the profiles fit exactly together. The following figure shows details.
Figure 1-3