8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________8-1
8
Final Adjustment and Configuration
After the set up of the Display Wall, the system has to be fine adjusted. This is done via the IR Remote-Control
and the OSD (or the respective commands via the RS 232 Remote-Control).
8.1
The IR Remote-Control Unit
Figure 8-1
IR Remote Control Unit (RCU)