![background image](http://html1.mh-extra.com/html/barco/overview-d-50/overview-d-50_installation-manual_4197749025.webp)
3. Installation of Screen Module
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________3-1
3
Installation of Screen Module
The screen modules are precision optical components! Do not touch with your bare hands.
Unpack always with two persons!
Use fabric gloves!
Figure 3-1
Unpacking a screen module
Lift simultaneously on both sides - don't tilt.
Unpacked screens shall directly be installed! Don't park on the floor!
Danger of breaking!
The following tools are required to assemble the screens:
Cloth gloves.
Long hexagon key size 5 mm.
Proceed as follows to assemble a screen module:
•
Remove the covers at the rear of the dark boxes.
•
Pull on cloth gloves.
•
Unpack screen module.
3.1
Installation of the standard screen module
•
Place the screen module on the guide pins (Figure 3-3) on the front of the dark box. Be careful to ensure
that the edges of the screens are not damaged.