Barco OV-708, Installation Manual

Page: 23 / 78

Installation
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
________________________________ ________________________________ _______________________________________________ _______________ _______________ _______________ 18
Step 09
Mount the left bottom plate R857041.
Make sure that the open sid es of the plate show to
the bottom!
The screws to fix the bottom plate are already
mounted, see picture. There is a gap of 5mm, so
there is no need to loosen the screws.
Slid in the bottom plate and fix the screws!
Step 10
Mount the right bottom plate R857042 accordingly!
Make sure that the open sid es of the plate show to
the bottom!
Step 11
Unpack the display module!
The rear bottom profile R855679 which is included in
the display module "completes" the pedestal.
The remaining parts of the pedestal are installed
later.
top rear profile, top front profile: see Step 25
top cover: see Step 65
cable hub: see Step 57
cable grommet: see Step 60
cable guide covers: see Step 60
corner brackets: see Step 12