Barco NW-12, User Manual

Page: 28 / 181

4. Installation
4.5.2 The front panel
View
The front panel of the projector can be divided in 2 major parts :
1.
Signal Input/Output section
2. System input/output section
2
DESKTOP INPUT DESKTOP INPUT
DVI DVI COMPUTER COMPUTER
RS 232 C RS 232 C DVI DVI R.C. R.C.
DESKTOP INPUT
DVI COMPUTER
RS 232 C DVI R.C.
1
R / PR R / PR G / Y G / Y B / PB B / PB Hs / Cs Hs / Cs Vs Vs VIDEO VIDEO S-VIDEO S-VIDEO R / PR G / Y B / PB Hs / Cs Vs VIDEO S-VIDEO
2
Image 4-15
Front panel connections
The signal input/output section
The input/output section has a modular architecture i.e. it is composed of several (5) slots which can be equipped with different input
modules :
The different available inputs that can be installed :
• RGBHV & Video analog input
• HDCP DVI & Computer (D15) VGA input
• SDI/HDSDI (option)
• DVI/HDMI (HDCP) (option)
The different available outputs :
• DVI output & RS232 IN
The projector is by default equipped as follows:
• Layer 1: empty (can be fi tted with any input board)
• Layer 2: empty (can be fi tted with any input board)
• Layer 3: RGB & Video input board ( fi xed)
• Layer 4: DVI & D15 input board ( fi xed)
• Layer 5: DVI output and RS232 board ( fi xed)
24 R59770286 NW-12 25/09/2008