![background image](http://html1.mh-extra.com/html/barco/nw-12/nw-12_user-manual_3850258120.webp)
7. Advanced
How to freeze the image ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Freeze
Image 7-115
5. Press
ENTER
to activate the Freeze function
The image can also be frozen using the FREEZE key on the RCU
7.8.4
Standby Timer
What can be done ?
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down after a pre determined
time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select
General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select
Standby Timer
Image 7-116
5. Press
ENTER
A dialog box is displayed
Image 7-117
6. Use
↑
or
↓
to select the radio button
Enabled,
a box surrounds the selected item, press
ENTER
to activate
7. Use
↑
or
↓
to browse to the input
fi
eld
116
R59770286 NW-12 25/09/2008
Summary of Contents for NW-12
