![background image](http://html1.mh-extra.com/html/barco/nw-12/nw-12_user-manual_3850258108.webp)
7. Advanced
3. Use the cursor key
←
or
→
, the numeric keys on the RCU, or the local keypad, to edit and change the value of the Sharpness.
Note:
The Sharpness can be set from –8 to +8.
4. Press
BACK
to return to the
Geometry Edit
menu.
7.6.6.9
Geometry Reset
Overview
•
•
7.6.6.9.1
Reset all levels
How to reset all level ?
1. Start the Geometry
Edit
menu
2. Push
↓
or
↑
to select
Reset
3. Push the
→
key to pull down the menu.
4. Push
↓
or
↑
to highlight
Reset all levels....
Image 7-92
All the levels are reset. If these levels contained geometry corrections, this will be noticed in the image by a jump.
5. Press
BACK
to return to the
Geometry Edit
menu.
7.6.6.9.2
Restore to a level
What can be done ?
Restore to a level means that all the higher level geometry corrections are reset (all geometry correction values are set to 0). The
correction values of the level and all the lower levels are kept.
104
R59770286 NW-12 25/09/2008
Summary of Contents for NW-12
