24 ______________________________________________________ Barco - NSL-4601 - User manual
Operation
5.3.3
Remote control
Figure 10: Location of the primary controls on the remote control
NOTE
:
The remote control receiver is located below the power LED on the control panel at the rear
side of the display. Access via the remote control should be done from the rear side of the
panel.
NOTE
:
Battery replacement should be done as depicted on the back side of the remote control. Use a
Lithium Battery CR2025 3V type.
1
2
3
5
4
6
7
9
10
1
2
3
4
5
6
7
8
9
10
Power: Power On / Off button
Source: Selects the external input source
Select: confirms your choice
Up: Function control in OSD
Down: Function control in OSD
Left: Function control in OSD
Right: Function control in OSD
Menu: Activates the OSD menu, returns to the previous menu
Info: Information Display
Auto: Automatically adjust position & horizontal size, phase (PC mode only)
8
