27
R5915130 /05
Nio 2MP / 3MP LED Display
To set the OSD menu timeout
1.
Bring up the OSD main menu.
2.
Navigate to the
OSD Settings
menu.
3.
Enter the
OSD Timeout
submenu.
4.
Select
Enabled
/
Disabled
as desired and confirm.
4.5 Power lock function
About power lock function
When the power lock function is enabled, it is no longer possible to switch off your display via the jog dial as
described in
. DPMS mode is not affected by this setting.
To enable/disable the power lock function
1.
Bring up the OSD main menu.
2.
Navigate to the
Power Management
menu.
3.
Enter
Power Lock
submenu.
4.
Select
Enabled/Disabled
as desired and confirm.
4.6 DPMS mode
About DPMS mode
Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnostic
lifetime by automatically switching off the backlight when the display is not used for a specified period of time.
By default, DPMS mode is enabled on your display, but it also needs to be activated on your workstation. To
do this, go to the “Power options” of your workstation.
Barco recommends setting DPMS on your workstation to activate after 30 minutes of non-usage.
When DPMS mode is enabled, three additional functions become available: hibernate, presence
sensor and dry mode. See
for more information.
When DPMS mode
with
USB charging is enabled (see
) and hibernate is
enabled (see
), you can easily awaken your system from hibernate with a
mouse/keyboard connected to the display.
When DPMS mode
without
USB charging is enabled (see
) and hibernate
is enabled (see
), you can only awaken your system from hibernate by pressing
the jog dial, or with a mouse/keyboard connected to the workstation (and not to the display).
To enable/disable DPMS mode on your display
1.
Bring up the OSD main menu.
2.
Navigate to the
Power Management
menu.
3.
Enter the
DPMS Mode
submenu.
4.
Select
Disabled, USB Charging Enabled or USB Charging Disabled
as desired and confirm.
Summary of Contents for Nio MDNC-3521 SNES
