Barco Nio Fusion12MP, User Manual

Page: 19 / 66

19 R5913350 /02 Nio Fusion 12MP
T
W
L
min
L
max
Image 2 – 10
2.5 VESA-mount installation in portrait mode
Introduction
By default, your Nio Fusion 12MP display is mounted in landscape position but it can also be used in portrait
position. This section explains how to install and use the display in portrait orientation. Carefully follow the
instructions hereafter to ensure proper product operation and to avoid physical damage to the product.
Instructions
1. Physically mount the display in portrait position. Both clockwise and counterclockwise orientation are
supported.
You can choose to either mount the display on the existing stand, or on a compatible VESA mount.
Follow the instructions as described in
“ VESA-mount installation ” , page 16 to install the display on a VESA
mount . These instructions can also be used to mount the display in portrait position on the existing display
stand.
2. Connect the display to your workstation.
When using the display in portrait position only one DisplayPort cable can be connected. This will give you
the full resolution at reduced refresh rate but with just one Windows taskbar at the bottom of the screen.
3. For your convenience, align the display's OSD menu orientation with the physical position of your display.
For instructions, see “ OSD menu orientation ” , page 26.
4. In the EDID format menu of the OSD, change the format to DisplayID 1.3 . For instructions, see “ EDID
format ” , page 38.
5. In the EDID timings menu of the OSD, change the resolution to 12MP. For instructions, see “ EDID timings ” ,
page 38.
6. Rotate the Windows desktop in portrait mode.
From Windows 7 onwards, an “ Orientation ” option is available in the display settings. For Windows 10, see
https://support.microsoft.com/en-us/help/4027186/windows-10-change-screen-orientation .
Installation and setup