Barco MXRT-7600, User Manual

Page: 32 / 60

K5905271 /16 Display Controller
32
5.4 Conference CloneView ™
5.4.1 Description
Overview
This feature allows the user to clone the images sent to one or more displays to other displays or projectors
attached to the same Barco Display Controller.
Conference CloneView supports zooming and panning on the
cloned image(s) for ease of viewing.
Image 5-4
Supported display controllers
Conference CloneView is supported by all systems with an MXRT-x400 or later display controller.
5.4.2 Operation
Using Conference CloneView
Create a new clone session and select up to 3 source displays and up to 3 target displays for the clone
session. The source and target displays must be attached to the same display controller. The cloned image
can be scaled to fit the resolution of the target display. With a Barco Display Controller with 4 outputs, it is
possible to have two independent cloning sessions.
When the cursor is over to the cloned image, it will change to the Barco cursor. The user can zoom in on the
cloned image by rolling the mouse wheel and pan the image with the left mouse button.
When zoomed in, the cloned image may be bigger than the clone display and part of the image may
be off screen. Click and drag the left mouse button and move the cursor to pan to the portion of the
image that is off screen.
Right clicking on the cloned image will bring up the Conference CloneView context menu. The menu options
are described below.
Image 5-5: Conference CloneView Context Menu
• Minimize: This minimizes the cloned image to show the desktop.
• Zoom to 1:1: Changes the scaling to 1 target pixel per source pixel. If the source resolution is larger than
the target resolution, panning will be necessary to see the entire image. If the source resolution is smaller
than the target resolution, black boarders will show around the image.
“ Stretch to fill ” has priority over this
option.
• Reset Zoom Level: When “ Stretch to fill ” is selected in the Barco System Settings Control Panel, this will
reset to the minimal zoom possible to make the stretched aspect ratio possible. When “ Stretch to fill ” is not
selected, this option will reset the zoom to 1:1. When the image is already at the minimum zoom level, this
option is grayed out.
• Pause Cloning: This suspends updates to the clone image; the source can continue to change while the
target image remains static. Select it a second time to resume active cloning.
• Stop Cloning: Select this option to stop cloning on the current Display Controller. It has the same effect as
clicking on the Stop Cloning button in the Barco System Settings Control Panel.
Driver and Intuitive Workflow Tools