Barco MiSPHERE, Installation Manual

Page: 36 / 59

6. Basic setup procedures
6.1 Create a MiSPHERE string
Necessary parts
• MiSPHERE link cable.
• MiSPHERE safety cable (same length as link cable).
• MiSPHERE end cap.
How to create a MiSPHERE string ?
1. Attach a short safety cable (A) with the bottom safety eyelid (B) of a MiSPHERE unit as illustrated.
Note: The bottom safety eyelid is located at the same side of the female output socket (F) of the MiSPHERE unit.
A
F
B
Image 6-1
2. Connect a short link cable (C) with the female output socket (F) of the MiSPHERE unit as illustrated.
C
F
Image 6-2
3. Attach the other end of the short safety cable (A) with the top safety eyelid (D) of another MiSPHERE unit as illustrated.
Note: The top safety eyelid is located at the same side of the male output socket of the MiSPHERE unit.
D
A
Image 6-3
4. Connect the female side of the short link cable with the male input socket of the next MiSPHERE unit as illustrated.
32 R5976941 MISPHERE 03/01/2006